If your packaging touches food, you can’t just assume the plastic, ink, or adhesive is safe — regulators require proof that chemicals from the packaging aren’t migrating into the product above legal limits. That proof comes from migration testing, and the first real decision most brands face is whether to build that testing capability in-house or send samples out to a third-party lab.
This guide breaks down what migration testing actually involves, what each option costs you in time, money, and control, and how to decide which setup fits your product line and growth stage.

Quick Answer
Most companies — even mid-sized packaging and food brands — are better served by an established third-party lab: it’s cheaper than building equivalent in-house capability, the results carry more credibility with retailers and auditors, and you’re not stuck maintaining expensive instruments. In-house testing only pencils out if you’re running high sample volumes constantly, need same-day screening during R&D, or are testing proprietary formulations you don’t want to send off-site.
What Migration Testing Actually Covers
Migration testing checks whether substances in food-contact packaging — plastics, coatings, adhesives, printed inks — transfer into food at levels that could be unsafe. In the US, this falls under FDA rules in 21 CFR Parts 170-199; in the EU, plastic food-contact materials are governed by Regulation (EU) No 10/2011, which sets an overall migration limit of 10 mg per dm² of contact surface (or 60 mg/kg of food) and separate limits for specific substances.
Labs test against standardized food simulants rather than real food: Simulant A (10% ethanol) for aqueous foods, Simulant B (3% acetic acid) for acidic foods, Simulant C/D1 (higher-ethanol or fatty-food stand-ins), and Simulant D2 (vegetable oil) for fatty foods. The actual test method for plastics’ overall migration is standardized as EN 1186. Whoever runs the test — your own lab or an outside one — needs the right simulants, ovens or migration cells held at specified times and temperatures, and analytical instruments (typically GC-MS or ICP-MS for specific-substance testing) to quantify what migrated.
Comparing the Two Models
Established third-party labs (Eurofins, Intertek, SGS, Bureau Veritas, Campden BRI, and similar networks) commonly hold ISO/IEC 17025 accreditation for their relevant test methods. That’s not a blanket legal requirement for this kind of brand-owner compliance testing — it’s a voluntary credential labs pursue because it signals to retailers and auditors that the lab’s equipment and procedures have been independently verified. You send samples, specify the simulants and substances relevant to your packaging and food type, and get a report back — typically in one to a few weeks depending on scope. Per-sample costs for a defined testing package commonly run from a few hundred up to a couple thousand dollars depending on how many simulants and substances are covered; you pay per test rather than carrying fixed overhead.
Building in-house means buying analytical instruments, migration cells or climate-controlled ovens, and hiring or training chemists who understand the applicable regulations and methods. That’s a substantial, ongoing capital and staffing commitment — and if your in-house lab ever needs to operate in one of the narrower contexts where accreditation is actually mandated by law (see below), you’d need to pursue ISO/IEC 17025 accreditation for your own lab too. The payoff of going in-house is speed: you can screen new formulations or supplier changes same-day during development instead of waiting on a lab queue, and you keep full control over proprietary recipes or packaging designs you’d rather not share externally.
A common middle path: keep a basic in-house setup for quick screening and troubleshooting during R&D, but send final compliance-confirming samples to an established third-party lab before a product ships. That combination buys speed without sacrificing the external credibility that retailers and brand partners tend to expect on a compliance report.

Tips / Common Mistakes
Don’t assume accreditation is a blanket legal requirement everywhere it comes up — ISO/IEC 17025 accreditation is mandated by law only in specific regulatory contexts, such as official-control laboratories under EU Regulation 2017/625 and, for certain food categories, under FDA’s Laboratory Accreditation for Analyses of Foods (LAAF) program. Outside those specific contexts, most brand-owner compliance testing for food-contact packaging isn’t legally required to come from an accredited lab. That said, check whether your retailer, customer, or export market expects accreditation anyway, since many do as a practical standard even where the law doesn’t mandate it. Match the simulants to your actual food type (fatty vs. acidic vs. aqueous), since testing with the wrong simulant can produce a passing result that doesn’t reflect real-world risk. Build in lead time: third-party lab queues can run one to several weeks, so request testing before your packaging launch date, not after. And if you switch suppliers or resin lots, re-test — migration results are specific to the exact material formulation tested, not the product category in general.
Explore more: more packaging compliance guides.
Migration testing labs FAQs
Is ISO/IEC 17025 accreditation required for migration testing?
It’s legally mandated only in specific regulatory contexts — for example, official-control laboratories under EU Regulation 2017/625 must work to that standard, and FDA’s LAAF program requires accreditation for labs testing certain food categories. Outside those contexts, most brand-owner compliance testing of food-contact packaging doesn’t legally require an accredited lab in the US, though many retailers and customers expect it anyway as a practical standard, and it adds credibility to your results either way.
How much does third-party migration testing typically cost?
It varies by how many food simulants and substances you need tested, but a defined testing package commonly runs from a few hundred to a couple thousand dollars per sample. Get a quote based on your specific packaging material and food-contact use.
Can migration modeling replace lab testing?
Sometimes. Software-based migration modeling can predict whether a substance is likely to stay under legal limits, which can reduce how much physical lab testing you need. But if the model shows levels close to or over the limit, you’ll generally still want physical lab test results.
Find the Right Packaging Supplier
Search the free Packaura supplier directory — filter by material, certification, and location to find vetted suppliers. Search the Supplier Directory.
Want packaging news in your inbox? Subscribe to the free newsletter.
Photo by Trnava University on Unsplash.